Bradite two pack Epoxy/Polyurethane
For use in environments of C3 Medium to C5 Very High corrosive intensity on bare and previously painted steel in moderate to poor condition that has been manually prepared to ST3 or abrasive blast cleaned to SA2.5
Main features:
- Maximum corrosion resistance.
- Maximum weathering and UV light resistance.
- Surface tolerant.
- Full BS4800 and RAL colour range.
- Cures at lower temperatures.
Ask for System SB1
Spot/coat
Bare and vulnerable areas using Bradite EP92 Surface Tolerant Primer.
One coat
Bradite EP92 Surface Tolerant Primer.
One coat
Bradite EF91 Epoxy Coating in a colour to suit the finish.
One coat
Bradite PG77 Polyurethane Gloss Enamel in the chosen colour.
Please contact us for further advice and information or refer to the following safety/technical data sheets:
Safety:
- Bradite EF91 Epoxy Coating (32KB)
- Bradite EP92 Surface Tolerant Primer (32KB)
- Bradite PG77 Polyurethane Gloss Enamel (24KB)
Technical:
All our data sheets are provided in PDF format. You may need the free Adobe Reader software installed on your computer to view them.
