Epoxyshield Clear Sealer Prim 5220.5 5L
BN4946005F
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Clear single pack floor sealer / dust proofer.
Share...
In detail
A one component, water-based, concrete sealer based on a vinyl acrylic binder.
It reduces dust production, protects the floor against liquid/chemicals and simplifies cleaning.
Single pack, easy to apply, non-yellowing clear finish (gloss) and an ideal primer for EpoxyShield ULTRA coatings.
- Size
- 5L
- Coverage
- Up to 10sq/m per litre
- Touch dry
- 1-4 hours
- Recoatable
- 5-8 hours
Data sheets
Additional information
EpoxyShield SEALER 5220 Transparent one component water-based concrete sealer. Reduces dust production, protects the floor against liquid/chemicals and simplifies cleaning. The sealer is quick-drying, very simple to apply and is suitable for light duty. It is also an ideal undercoat for EpoxyShield° ULTRA 5200-series floor coatings.
Finish
Gloss.
Surface preparation
Only apply to completely clean and dry concrete floors. Do not apply to smooth and completely sealed concrete or concrete containing a curing compound. Remove oil, grease and all other contaminants with EpoxyShield° Cleaner/ Degreaser 2901. Allow new concrete to set for at least 30 days. Remove laitance, loose and damaged concrete by sandblasting or keying with RUST-OLEUM Surfa-Etch 108. Repair all holes and cracks with EpoxyShield° concrete repair products. First roughen well-sealed and smooth concrete (sandblast, key). During application the surface must be clean and dry.
Mixing
Stir the sealer before use. Application: (temperature: 10-35°C / <85% r.h.) It is recommended to apply two coats. If the product is used as sealer/impregnation coat for EpoxyShield ULTRA 5200 coatings one coat can be sufficient.
Drying times
(at 20°C / 50% r.h.)Touch dry: 1-2 hours — Recoatable 6 hours — Safe to walk on: 8-12 hours — Temperature and humidity affect the drying times.
Coverage
Around 10m² per litre per coat dependent on surface and application. Two coats recommended.
Cleaning
With soap and water immediately after application.
